- Home
- HITEC SERVOS
- HLS12-30210-6V 210:1 Gear Ratio, 30mm Stroke, 5mm Lead, Linear Servo (6V)
Product Description
With 30mm of travel and a 210:1 gear ratio, the HLS12-30100 is ideal for short stroke applications requiring higher power.
Controlled using a traditional PWM servo signal, Hitec linear actuators provide optimized motion control for precise and powerful positioning. Whether your application demands a low-profile form factor, or extended linear throws, we have an actuator to suit your needs. Our linear actuators are popular for a myriad of uses including robotics and animatronics, as well as industrial mechanical applications. Programmable stroke and speed settings, power-off position stability, and a variety of mounting options, provide additional functionality and flexibility. Additionally, Hitec linear actuators provide full excursion using a 1050 - 1950µs input range. This feature allows fully compatible use with all radios, by eliminating the requirement for programming extended rates to achieve full motion.
The HLS12-3050 and HLS12-30100 offer more speed, while additional force is available with the high gear ratio of our HLS12-30380 versions.
Applications requiring additional excursion will be better matched to our HLS12-50XX and HLS12-100XX series linear actuators.
HLS12-30210-6V Servo Specifications
Linear Series | |
Command Protocol | PWM |
Lead Screw | 5mm |
Motor Type | Cored Metal Brush |
Operating Voltage (Volts DC) | 4.0V ~ 8.4V |
Testing Voltage | 6.0V |
Gear Ratio | 210:1 |
No Load Speed | 6.1mm/s |
No Load Current | 100mA |
Maximum Efficiency Point | Load (kg / N): 3.6 / 35 Speed (mm/s): 4.5 Current (mA): 200 |
Pear Power Point | Load (kg / N): 6.2 / 61 Speed (mm/s): 3.2 Current (mA):310 |
Max Force (Lifted) | Load (kg /N): 8.0 / 79 Speed (mm/s): 2.3 Current (mA): 400 |
Stall Force | 5.0kgf (49.03N) |
Stall Current | 500mA |
Max Static Force | 20.39kgf (200N) (above) |
Stroke SPEC | 30mm |
Repeatability | ±0.2mm |
Max Side Load (Extended) | 4.08kgf (40N) |
Outline Dimensions | 82.0 x 15.0 x 18.0mm ( 3.23 x 0.59 x 0.71 in. ) |
Weight | 34g (1.20 oz) |
Connector Wire Length | 160mm (6.29 in.) |
Connector Wire Gauge | 24AWG |
Bearing Type | Flange bearing |
Case Material | Engineering Plastic & Aluminum Pipe |
Gear Material | 4 Metal Gears |
IP Rating | IP4X |
Servo Amplifier Type | 32bit programmable Digital |