HFP-30 Digital Servo Programmer & Universal Servo Tester

Product Description

Our lightweight HFP-30 Field Programmer is the latest in digital servo testing and programming. Packed with advanced features and a large, easy-to-read LCD screen, it efficiently programs all Hitec digital servos, including the HS-5XXX, HS-7XXX, brushless HSB-9XXX, and the latest D-Series. Operating on a wide voltage range of 4.8~8.4, the Hitec HFP-30 is your hobby’s best, must-have accessory.

Product Videos

How to use the Hitec HFP-30 Servo Programmer in 12 minutes 12:51

In depth explanation of the Hitec HFP-30 servo programmer explained and demonstrated for you. I explain in detail both the servo testing mode and the servo programming mode of the HFP-30 programmer utilizing a Hitec brushless 9831 and one of the newer D-Series D951TW servos. If you're confused on exactly what the sync port does, I'll explain that as well. The positive and negative end points for the Brushless servos are not in degrees. I have measured and found that if you want to program the servo for 45° in each direction, set the endpoints to +/- 41. 45° = "+/- 41" on HFP-30 60° = "+/- 88" on HFP-30 90° = "+/- 181" on HFP-30 34° = "+/- 6" on HFP-30 (the smallest value you can set) This means each number is about .32° I took these measurements using the DPC-11 programming interface where you can choose the end points in degrees. I programmed on the DPC-11, and then hooked up the servo to the HFP-30 and recorded the values. .32° is not exact...but good enough if you don't have a DPC-11. @HitecMultiplexUSA HFP-30 Servo Programmer - https://bit.ly/37vcx84 HSB-9381TH (Brushless) - https://bit.ly/31nCxip D951TW - https://bit.ly/31ne1hh