HS-785HB Karbonite, 3.5 Turn Winch Servo

Product Description

The HS-785HB sail winch servo with its large drum wheel has 3 1/2 revolutions of travel for hauling in even the largest of sails. With its dual ball bearing supported output shaft the HS-785HB will provide years of reliable service.

Features

Large Drum Wheel with 3.5 Revolutions of Travel
Strong Karbonite Gear Train
Dual Ball Bearing-Supported Output Shaft
Water and Dust-Resistant Case

Accessories

Karbonite Gear Set | Link |
Plastic Case Set | Link |
Applicable Horns

HS-785HB Servo Specifications

Performance Specifications
Operating Voltage Range (Volts DC)	4.8V ~ 6.0V
Speed (Second @ 60°)	1.68 ~ 1.38
Maximum Torque Range oz. / in.	153 ~ 183
Maximum Torque Range kg. / cm.	11.0 ~ 13.2
Current Draw at Idle	8 mA
No Load Operating Current Draw	250 mA
Stall Current Draw	1,800 mA
Dead Band Width	5 µs
Physical Specifications
Dimensions (Inches)	2.32 x 1.14 x 1.96
Dimensions (Metric)	59.0 x 29.0 x 50.0
Weight (Ounces)	3.88
Weight (Gram)	110.0
Circuit Type	HT7003 Analog MosFet
Motor Type	3 Pole Metal Brush Ferrite
Gear Material	Karbonite
Bearing Type	Dual Ball Bearing
Output Shaft (type / Ømm)	Standard 24
Case Material	Plastic
Dust / Water Resistance	Splash Proof
Connector Gauge (AWG) / Strand Count	22 / 60
Radio Control Applications
Parkflyer	N / A
Sport Plane	N / A
Sailplane	N / A
3D Performance	N / A
Scale	N / A
Electric Helicopter	N / A
Gas Helicopter	N / A
On Road	N / A
Monster Truck	N / A
Buggies	N / A
Truggies	N / A
Short Course / Truck	N / A
Crawlers	N / A
Sail Boat	=>1M+ & Scale
Power Boat	N / A